600V/1000V Aluminum or Copper XLPE Insulation Unarmoured & Armoured LSZH Sheathed Fire Resistant Power Cables

APPLICATION

These XLPE insulated and LSZH sheathed cables are generally used for fixed installation. Suitable for building wiring, especially in areas where smoke and fume emissions may cause a potential threat to life but not for burial in the ground, either directly or in ducts.

STANDARD

Basic design to BS 8573:2012

FIRE PERFORMANCE

VOLTAGE RATING

600/1000V

CABLE CONSTRUCTION

Conductor: Annealed copper conductor, strand according to BS EN 60228 class 2.

Insulation: XLPE type GP8 according to BS 7655-1.3. HEPR type GP6 according to BS 7655-1.2, or crosslinked polyolefi n material type EI 5 according to BS EN 50363-5 can be offered as option.

Inner Covering option: The laid up cores may be coverd by an optional extrued inner covering or separating tape. It shall be possible to separate the cores easily.

Outer Sheath: Thermoplastic LSZH type LTS 4 according to BS 7655-6.1.

Outer Sheath option: UV resistance, hydrocarbon resistance, oil resistance, anti rodent and anti termite properties can be offered as option.

COLOUR CODE

Insulation Colour:

Blue, brown black and grey,

Alternatively, green-and-yellow, brown, black, grey

Sheath Colour: Black, other colours can be offered upon request.

PHYSICAL AND THERMAL PROPERTIES

Maximum temperature range during operation (XLPE): 90°C Maximum short circuit temperature (5 Seconds): 250°C Minimum bending radius:

Circular copper conductors(up to 25mm2): 4 x Overall Diameter

Circular copper conductors(above 25mm2): 6 x Overall Diameter

Shaped copper conductors: 8 x Overall Diameter

             Wooden drum, steel wooden drum, steel drum, flexible packing, etc.

         By sea, by road, by railway, by air, by international expresss.

  Trade terms:

Exw, FOB, CIF, CNF, CFR, CPT, etc.

1. Reply your inquiry in 24 working hours

2. Experienced staffs answer all your questions in fluent English.

3. Customized design is available. UEM&UBM are welcomed.

4. Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staff.

5. Special discount and protection of sales are provided to our distributor.

6. Sample: We can send out sample for test in one week if the order quantity is big enough. But the shipment charges is usually paid by your side, the charges will be rebounded when we have formal order.

7. As an honest seller, we always use superior raw material, advanced machines, skilled technicians to ensure our products to be finished in high quality and stable feature. Welcome to contact us or visit our company.

• Q: Is your company a factory or trading company?

  A: We are factory with our own trading company. Our trade business expands home and abroad.

• Q: When can I get the price?

  A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

• Q: How can I get a sample to check your quality?

  A: After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

• Q: What is Minimum Order Quantity?

  A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.

• Q: Which standards for your products?

  A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.

• Q: How about delivery time?

  A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.

• Q: Payment terms:

  A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight

• Q: What is your packing?

  A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.

ZMS 詳細をパッキング

FAQ

• Q: あなたの会社の工場や商社?

  を: 私たちは工場で私たち自身の商社です。 当社の貿易ビジネス拡張国内外。

• Q: を入手できますか?

  を: 私たちは通常後 12 時間以内に引用私たちます。 をあなたは非常に緊急の価格を取得する、お電話または電子メールで教えよう私たちは点お問い合わせ優先事項です。

• Q: どのように私はあなたのサンプル取得品質?

  : アフター価格確認、あなたがチェックするサンプルのために必要。 サンプルは無料ですが、貨物べき paid.

• Q: 最小注文数量?

  : 一般的に、 1000 メートル建物。 電源ケーブル用、装甲や unarmored 、 500 メートル。

• Q: あなたの製品基準?

  を: 私たちは国際基準にに従ってケーブルワイヤーと生成: IEC 、 ASTM 、 BS 、 DIN 、サンセリフ、 CSA または顧客の要求として。

• Q: どのように配信時間?

  を: 私たちは在庫配信は非常にクイック。 新たに生産製品、 15 に 25 日生産のため。

• Q: 支払条件:

  を: 通常 30% 前払いとして支払わ、バランス配信前に支払わ。 または 100% L/c

• Q: あなたのパッキング?

  を: 私たちの電気ケーブル電気ケーブルホイール、包装のための使用している、をホイールは、すべての鋼、鋼フレームと燻蒸木材、または燻蒸木製ケース。 を私たちは、別の別のケーブルの長さ、にが製品の配信中に問題ないであろう。

 
XLPE cable advantage:

XLPE cable have higher long-term working temperature and greater current rating, and under the condition of the same environment, XLPE cable may be reduced size (normal cross section) 1 or 2 class in comparison with paper and PVC cable. These are not only improving the quality and properties of products, but also reduce cables' production cost.

XLPE insulated power cable is used to transmit and distribute power for the power transmission and distribution system of 35kV or lower. It is generally applied in the fields of power, construction, mine, metallurgy, petrochemical industry and communication. It completely replaces the oil immersed paper insulated power cable and partiallyreplaces the PVC insulated power cable.

Construction from the Inner Part to the Exterior Part of the XLPE Insulated Power Cable
Copper or aluminum conductor 
XLPE insulation 
Copper tape or copper wire screen 
Galvanized steel wire or tape armored 
PVC or PE sheath

Note: "ZR-" includes ABC three kinds of flame retardent cables, which are respectively indicated in "ZRA-" or "ZRB-" "ZRC-". For example: "ZRB-YJV", "ZRA-YJV22".

Rated Voltage, No. of Core and Range of Sectional Area

1. DC resistance: conductor resistance of finished cable at 20°C per kilometer is not more than the following values.

2. Voltage Test and Partial Discharge Test

– Online consultation.

– Detailed quotation and catalog.

– Perfect service teams ensure the communication and purchase experience.

– Professional engineers team provide technical guidance.

– Complete QA system ensures both quality and safety of produced cable.

– 12 months of warranty. 

– Professional after-sale service team provide guidance of installation and other solutions.  

木製ドラムまたは木製・スチールドラム;

柔らかいコイル;

あなたの要求されたパッキングの方法。

  我々は、 厳格な検査工程中に原料から全体の生産、 セミ- 完成品まで修飾された最終的な製品。

1.15年経験だけ専門の製造。

2.厳格かつ完全な品質を確保するために試験手順。

3.迅速な納期。

4.この分野でより競争力のある価格。

5.輸出するための豊富な経験、 sgs検査、 を取って入札で。

私達の会社を訪問する歓迎・工場、私たちはいつもここにあなたのために。